Table of Contents
Advertisement
Diskette Drive Cabling
The following procedure explains how to cable a diskette
drive.
1. Connect the diskette drive signal cable connector to the
signal connector on the diskette drive.
2. Locate an available power connector coming from the
power supply.
3. Connect the power cable to the power connector on the
device.
PC Card Adapter Cabling
The following procedure describes how to cable a PC card
adapter.
1. Connect the connectors at one end of the cable set to the
PC adapter board. (The PC adapter board is installed in
one of the expansion slots. See "Installing and Removing
Expansion Boards" if the board must be installed first.)
The connectors are keyed to fit only one way.
2. Connect the connectors at the other end of the cable set to
the connectors at the rear of the PC card adapter.
Network Board Wake-On LAN Cabling
If your computer has the optional 10/100 MB network board,
your system can be readied for "Wake-On LAN" by
connecting the Wake-On LAN cable. Wake-On LAN allows
your system to be powered up remotely by a server computer.
5-74 Installing Options
Advertisement
Table of Contents
