Table of Contents
Advertisement
5. Connect the cooling fan cable to its connector on the
system board.
6. Replace the system board.
T
In a small desktop system, see "Replacing the System
Board — Small Desktop."
T
In a desktop system, see "Replacing the System Board
— Desktop."
T
In a minitower system, see "Replacing the System
Board — Minitower."
7. Connect any other cables that may have been
disconnected for access to the system board.
8. Replace the system unit cover.
T
For a small desktop or desktop system, see
"Replacing the Small Desktop or Desktop Cover."
T
For a minitower system, see "Replacing the
Minitower Side Covers."
9. Press the power button to start the system. Press
enter the CMOS Setup Utility.
T
If the system does not boot (as might be the case if
you are replacing one processor with a slower one),
press the power button a second time.
T
If the system still does not boot, clear CMOS (see
"Clearing the CMOS" and "Changing a System Board
Jumper Setting").
10. Set the processor speed using the CMOS Setup Utility
(see "Special Features Setup" in Chapter 3).
F2
to
Installing Options 5-33
Advertisement
Table of Contents
