Replacing The Front Panel - Minitower - NEC POWERMATE ES 5200 Manual

Hide thumbs Also See for POWERMATE ES 5200:
Table of Contents

Advertisement

Locating the blank panel tabs — minitower
A – Blank Panel Tabs
7. Remove the metal cover from the selected chassis bay by
pulling it out of the chassis. Save the cover for later use if
you decide to remove and not replace the device.
8. Install the device (see "Installing a 5 1/4-Inch Device —
Minitower").
Replacing the Front Panel — Minitower
Replace the front panel as follows.
Note:
removed a 5 1/4-inch device from your system
and didn't replace it, you need to cover the
opening in the chassis and the front panel.
5-84 Installing Options
Before replacing the front panel, if you

Advertisement

Table of Contents
loading

Table of Contents