Table of Contents
Advertisement
3. Press the plastic clips at the outer edges of the socket
away from the memory module (see the following figure).
This ejects the DIMM from the socket.
Removing a DIMM
A – Plastic Clip
4. If installing a DIMM, see the next section, "Installing a
DIMM."
5. If you are not installing a DIMM, slide the system board
into the chassis.
T
In a small desktop system, see "Replacing the System
Board — Small Desktop."
T
In a desktop system, see "Replacing the System Board
— Desktop."
T
In a minitower system, see "Replacing the System
Board — Minitower."
6. Replace the cover(s):
T
For a small desktop or desktop system, see
"Replacing the Small Desktop or Desktop Cover."
T
For a minitower system, see "Replacing the
Minitower Side Covers."
Installing Options 5-25
Advertisement
Table of Contents
