Table of Contents
Advertisement
3. Remove the front panel.
T
In a small desktop system see "Removing the Front
Panel — Small Desktop."
T
In a desktop system, see "Removing the Front Panel
— Desktop."
4. From the front of the system, insert the device, connector
end first, into the device bay (see the following figures).
Note:
for cabling, do not insert a 5 1/4-inch device all
the way into the bay.
Inserting a 5 1/4-inch device — small desktop
5. Connect the device cables (see "Connecting Device
Cables" and "IDE Drive Cabling").
6. Insert the device the rest of the way into the device bay,
making sure that the locking tabs on the sides of the drive
engage the brackets on each side of the device bay.
5-86 Installing Options
To easily access device connectors
Advertisement
Table of Contents
