Table of Contents
Advertisement
4. Turn the mouse over so that the cover and ball fall into
your palm.
5. Clean the mouse as follows.
T
Use tap water, or tap water and a mild detergent, to
clean the mouse ball.
T
Use a clean, lint-free cloth to dry the ball.
T
Blow into the mouse socket to remove remaining dust
or lint.
6. Gently put the ball back into the mouse.
7. Fit the ball cover back into the mouse and turn the cover
clockwise until it locks in place.
Battery Replacement
All system boards use a battery to maintain system
configuration information. Your system uses a coin-cell
battery mounted on the system board (see the following
figure). If it fails to maintain system configuration
information, replace it with an identically rated battery from
the same manufacturer.
The battery can explode if it is incorrectly
replaced or improperly discarded. When
replacing the battery use only the same battery
or an equivalent type recommended by the
manufacturer.
!
WARNING
Solving System Problems 6-11
Advertisement
Table of Contents
