Table of Contents
Advertisement
2. Contact NEC CSD support for instructions on
downloading the BIOS code and on performing the flash
ROM update.
3. Turn off the system.
4. Put the flash diskette in drive A, and turn on the system.
The Flash Memory Writer menu appears. Do not touch
any keys unless directed to do so.
Do not touch any keys once you insert the BIOS
flash diskette unless directed to do so.
5. Perform the upgrade exactly as directed by the support
technician and the onscreen prompts.
6. Power off the system as directed (usually by pressing
or pressing the power button).
7. After the system powers off, remove the diskette.
8. Reboot the system and start the Setup program. Select
Load Setup Defaults
recorded Setup selections you made at the beginning of
this procedure to set the parameters.
See Chapter 7 for information about using the website or the
bulletin board.
3-20 Configuring the System
! CAUTION
to reset the BIOS defaults. Use the
F1
Advertisement
Table of Contents
