Table of Contents
Advertisement
Locating the front panel posts and locking tabs — desktop
A – Locking Tabs
3. Once the locking tabs are free, pull the front panel away
from the chassis.
4. Identify the bay on the front panel for the device being
installed.
5. Remove the blank plastic panel from the selected bay by
pressing the panel tabs from inside the front panel and
pushing the blank panel out (see the following figure).
6. If a metallic shield covers the opening in the chassis,
remove it.
7. Install the device (see "Installing a 5 1/4-Inch Device —
Small Desktop and Desktop").
B – Posts
Installing Options 5-79
Advertisement
Table of Contents
