Floppy Options Submenu - NEC Direction T-Series Manual

2-6 Setup Utility
T
System Time and Date
These two fields specify the correct time and date. To change them, press the
Tab key to highlight the field you want to change, then press the + or – keys to
change the setting.
T
Hard Disk Predelay
This option keeps the BIOS from searching for a drive until the specified predelay
time has passed. This allows certain drives to spin up before being detected by the
BIOS.

Floppy Options Submenu

This submenu can be used to configure your system's floppy disk drives. To enter the
submenu, highlight the Floppy Options field, then press the Enter key. You'll see the
following options:
T
Diskette A:/B:
These fields specify the capacity and physical size of Diskette Drive A and B (if
included). To change these, highlight the field for the drive, press the Enter key
and select from the following options:
Disabled (default for Drive B)
360KB, 5.25 inch
1.2MB, 5.25 inch
720KB, 3.5 inch
1.44/1.25 MB, 3.5 inch (default for Drive A)
2.88 MB, 3.5 inch.
If you add an optional 5.25-inch diskette drive to your system, select Floppy B
and change the parameter to 1.2 MB, 5.25 inch.
T
Floppy Write Protect
This option enables or disables write protection for the diskette drive(s). Choose
the desired setting to enable or disable (default) this option.