Symbols Used On The Fan Control Module; Technical Specifications And Ratings - GSi GRAINVUE User Manual

Symbols Used on the Fan Control Module

Symbol
S.No
1
2
3
4
5

Technical Specifications and Ratings

Table 2-2 Technical specifications and ratings
Parameters
Operating Temperature
Storage Temperature
Environment Type
Pollution Degree
Installation Category
Altitude
Operating Relative Humidity (max)
IP Rating
PNEG-2394 Fan Control Module
Chapter 2: Installing the Fan Control Module
Warning. Read the following text carefully; it contains important information
which, if ignored, may cause the controller to operate improperly.
High Voltage. Hazard of electrical shock. Read the message and follow the
instructions carefully.
Direct Current (DC).
Alternating Current (AC).
Protective Earth Ground Terminal, primarily used for protective earth terminals.
Terminal connected to conductive parts of a device for the purpose of safety
and is intended to be connected to an external system for protective grounding.
-40°C to 50°C (-40°F to 122°F)
-40°C to 50°C (-40°F to 122°F)
Outdoor use
2
2
2000 Meters max. (6561 Ft. max)
• -40°C to 10°C: Non condensing
• 10°C to 30°C: 95% (± 3%) Non condensing
• 30°C to 40°C: 95% (± 3%) Non condensing
66
Meaning
Values
17