Storage - CanyCom S300 Operator's Manual

5

Storage

• Fire hazard; do not store the machine where there is a possiblity of ignition.
• Do not wash the engine or control panel with running water; water may enter
inside and cause rust or damage.
• Clean the machine before storage; leaving dirt or foreign objects may cause
rust or damage.
• Do not store the machine in a humid, dusty, or hot place.
Follow the instructions in Parking (page 39) to park the machine.
1.
2. Move the throttle lever to [
3. Clean dirt off of the machine.
4. Follow the Maintenance Schedule (Page 51) to perform scheduled services.
5. Wipe clean the steel parts with oiled cloth.
6. Grease the greasing points.
7. Change engine oil (Page 61).
8. Completely drain engine coolant.
9. Clean the air cleaner element (page 85).
10. Completely drain the fuel tank.
11. Turn the battery kill switch to the [
12. Cover the machine with protective, water-proof covering after the machine is cooled off.
NOTE
• Battery dischages even when it is not in use. A battery may hold charge for a few
months, but it is a good practice to charge battery before it goes flat; it will extend
the battery life.
• Refer to the Operation Manual for the engine, for detailed instructions on preparing
the engine for storage.
• Before starting up the machine after storage, make sure to fill engine coolant and
fill fuel and bleed air from the fuel system. After starting, check for leaks and drive
slowly to make sure everything is in order.
Maintenance
(SLOW)] position and press the parking brake switch
(OFF)] position. Service battery (page 79).
-90-
.