CanyCom S300 Operator's Manual page 41

36A3M-0402-050E
Oil Pressure
Error
Coolant Temp.
Overheat
36A3M-0402-060E
Operation
7.
ON
Start
NOTE
8.
Parking
Charge
DPF Regen.
9.
Engine Stop
NOTE
Roll-over
Turn the main switch to the [
position to start the engine. Once the engine
starts, release the key immediately; switch
will automatically return to the [ |
position.
• Avoid frequent restarting. Once the engine
starts, run it for a while to charge the
battery
Make certain the warning lights are not lit. If
any of them is lit, stop the engine immediately
and refer to the Troubleshooting (page 91)
to take an appropriate measure.
Allow the engine to warm up by running it
for 3-5 minutes without any load. (It is not
necessary when the engine is already warm.)
• Drive the machine gently in the first 40 to 50
hours of use after purchase for breaking-in.
-33-
4
(START)]
(ON)]