CanyCom S300 Operator's Manual page 63

Item
Shall work smoothly.
There shall be no leaks when extending and
contracting cylinder.
Extend dump cylinder fully under load
Hydraulic
and hold. Stroke shall be within the range
Cylinders
specified by manufacturer.
Cylinder tube and rod shall be free of dents,
cracks, bends, or scratches.
Cylinder mounting pins shall be free of
damage or excessive wear.
Hydraulic valve shall be mounted properly.
When operated, valve shall extend or
Hydraulic
contract the cylinder, and stop it when
Valve
released.
There shall be no leak in or around hydraulic
valve, plumbing , or joints.
Vessel shall be raised,lowered and swiveled
smoothly. Tailgate shall open and close
smoothly.
Tailgate shall open smoothly when vessel
is raised, and closes and locked when it is
lowered..
Vessel
Shall be free of cracks, deformation, or
(Bucket)
corrosion.
Fastening bolts or nuts shall not be loose or
missing.
Raise and lower vessel to make sure that
there is no excessive play at the cylinder pin
and dump pivot.
Shall be free of cracks, deformation, or
Chassis
corrosion.
Frame Fastening bolts or nuts shall not be loose or
missing.
Shall be free of cracks or deformation.
Doors shall open, close, and lock properly.
Body Panels
Fastening bolts or nuts shall not be loose or
missing.
Maintenance
Description
-55-
Schedule
Note
√ √ √
√ √
√
√ √
√ √ √
√ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √
√ √
√ √ √
√ √
√ √ √
√ √ √
5