CanyCom S300 Operator's Manual page 30

2
23. Error Warning . . . . . . . . . . . When this lights up, it indicates either the ECU or the
24. Overheat Warning . . . . . . . This lights up when the engine coolant gets 120 degrees
25. Charge Warning . . . . . . . . . This shows if the battery is being charged. It turns on when
26. Engine Stop Warning . . . . . This turns on when the engine is stopped by the
27. DPF Service Indicator . . . . This indicates if the DPF (Diesel Particulate Filter) needs to
28. Roll-over Warning . . . . . . . This lights up when the machine rolls more than 27.5
29. ROPS . . . . . . . . . . . . . . . . . . ROPS (Roll Over Protection Structure) protects the
30. FOPS . . . . . . . . . . . . . . . . . . FOPS (Falling Object Protection Structure) protects the
Controls and Components
engine itself has an error.
Celsius.
the main switch is turned on, and under normal condition,
it goes off once the engine starts.
emergency switch or the tilt sensor.
be manually regenerated. It is off when the DPF does not
need to be regenerated or is already regenerated. When
it lights up, the DPF needs to be regenerated manually.
When it flashes, the DPF is being regenerated.
degrees.
operator in case of rollover.
operator from small objects falling from above.
-22-