Maintenance Mode Panel - CanyCom S300 Operator's Manual

Maintenance Mode Panel

36A3M-0405-031E
How to Operate
1. Press the left-most multifunction switch and the cursor switch DOWN to bring up the
Maintenance Mode Panel.
1. Complete (COMP) Switch . Use up/down cursor switch to highlight the message that is
2. Repair (RPR) Switch . . . . . This switch is provided for the service personnel to use
Change Engine Oil
Change Hydraulic Fluid
Change Motor Oil
Greasing Needed
Change Engine Coolant
Operation
lit up. Then press this switch to turn off the highlight of the
message.
when servicing this machine.
Message Interval
Initially 50 hr / Every 400 hr afterwards
Initially: 500 hr / Every 1000 hr afterwards
Initially: 200 hr / Every 1000 hr afterwards
Every 100 hr
Every 300 hr
-47-
4