Washing - CanyCom S300 Operator's Manual

Washing

• High-pressure washer can be dangerous. Never point it to a person. Make sure
no one is behind the machine when washing the machine with a high-pressure
washer. Follow the instruction manual of the high-pressure washer and
familialize with its use.
• Never point the high-pressure washer or running water to the engine, ECUs and
other electrical parts, control panel, LCD, or caps with a breather. Water can
enter and cause damage.
• High-pressure washer can peel off the sticker labels.
Never use direct or straight mode
Straight
Short distance washing staictly prohibited
lass than 2m
36A3M-0512-010E
NOTE
• Water under high pressure can damage the wiring and insulation of the electrical
components, which can result in damage, electrical shock, or fire.
• Water under high pressure can damage the hydraulic plumbing, which in turn can
cause the hydraulic oil under very high pressure to escape and cause damage or
severe injury.
• Water under high pressure can peel off sticker lables, paint and plating, or damage
rubber, plastic, or glass parts.
• Water under high pressure can enter inside the engine, transmission, electrical
parts, tanks, cabin, etc. to cause damages.
Maintenance
Diffues
lass than 2m
1. Set the washer nozzle (of a hose or a high-
pressure washer) to diffuse mode. Never use
direct or straight mode.
2. When washing the machine with a running
water from a hose or with a high-pressure
washer, keep enough distance from the
machine (2 m (2.2 yd) or more with running
water. With a high-pressure washer, refer to
its instruction manual).
-89-
5