CanyCom S300 Operator's Manual page 103

Area Malfunction
Track does not
move smoothly.
Machine vibrates
Chassis
Machine does not
travel straight.
Dump Tailgate does not
Vessel open or close
Related properly.
Light does not turn
on.
Safety
Devices
Oil pressure
warning stays on
after the engine
starts.
Troubleshooting
Possible Cause
Not properly
adjusted.
Other (other than
the above).
Track is loose.
Track is derailed.
Mount bolt on track
roller, upper roller,
sprocket, or idler is
loose.
Track roller bearing
is damaged.
Other (other than
the above).
Roller, upper roller,
idler or sprocket is
damaged.
Other (other than
the above).
Not properly
adjusted.
Foreign object is
stuck in the gate.
Other (other than
the above).
Damaged wiring.
Blown fuse.
Other (other than
the above).
Low oil level.
Other (other than
the above).
-95-
Corrective Measure
→Adjust.
→Please contact
your CANYCOM
representative.
→Adjust.
→Put it back and
adjust its tension
→Tighten.
→Please contact
your CANYCOM
representative to
replace..
→Please contact
your CANYCOM
representative.
→Repair or replace.
→Please contact
your CANYCOM
representative.
→Adjust.
→Remove the
foreign object.
→Please contact
your CANYCOM
representative.
→Repair.
→Replace.
→Please contact
your CANYCOM
representative.
→Fill.
→Please contact
your CANYCOM
representative.
6
Ref.
Page 73
Page 73
Page 82
Page 62