CanyCom S300 Operator's Manual page 40

4
36A3M-0401-030E
Dump Lever
36A3M-0402-020E
Drive Lever
36A3M-0402-030E
36A3M-0402-040E
Operation
Emergency Swtich
Swivel Lever
ON
3. Make sure the emergency switch is in the
[ RUN] position. If not, turn this switch to
the right to the [
4. Make sure the dump and swivel (Swivel
Dump model) levers are in the neutral
position and the lock plate is in the locked
position (around the base of the levers).
5. Make sure drive levers are in the neutral
position.
6. Insert the key into the main switch and
Turn it to the [ | (ON)] position and wait for
the LCD screen to come up.
NOTE
• When the ambient temperature is 10°C (50°F)
or below, automatic preheat is activated for
5 seconds.
-32-
RUN] position.