CanyCom S300 Operator's Manual page 106

7
36A3M-0701-010E
Loading to the Transporter
1. Park the transporter and apply parking brake. Secure the wheels with chocks.
2 . Place the loading ramps. Secure the hooks of the ramps firmly and flush with the bed of
the transporter.
3. Set the H/L Speed Selecter switch to [
forward onto the bed of the truck.
4. Park the machine according to the instructions in "Parking" (Page 39).
5. Tie the machine at lift hooks with rope or tie-down belts and secure it onto the bed of the
transporter securely.
Unloading from the Transporter
1. Park the transporter and apply parking brake. Secure the wheels with chocks.
2. Undo rope or tie-downs that secure the machine.
3. Place the loading ramps. Secure the hooks of the amps firmly and flush with the bed of
the transporter.
4. Set the H/L Speed Selector switch to [
backward from the loading deck to the ground.
Transporting
Height
(LO)] mode and drive the machine slowly
(LO)] mode and drive the machine slowly
-98-