Transporting; Hauling; Loading Snd Unloading - CanyCom S300 Operator's Manual

Hauling

Loading and Unloading
•Park the transporter (truck) on a level ground and apply parking brake. Always
use chocks to secure wheels.
•Do not allow bystandars to come close to the machine or the transporter when
loading or unloading the machine.
•Use only the loading ramps with suffient strength(to withstand the combined
weight of the machine and the operator), width (more than 1.2 times the
width of the track), and length (more than 4 times the height of the bed of the
transporter), and have anti-slip ramp surfaces.
•Secure the hooks of the loading ramps firmly and flush with the bed of the
transporter.
•Move slowly foreward when loading onto, and move slowly backward when
unloading off of the transporter. Pay special care when going over the joint
between the bed and the ramps; the machine may tip.
•Do not turn on the loading ramps. The machine may fall.
•Tie down the machine securely. Make sure the machine does not move around
on the bed of the transporter.

Transporting

-97-
7