Table of Contents
Advertisement
The headlight beam can be adjusted by turning the
provided screw with a screw driver (1 - Fig. 53).
By turning it clockwise the headlight beam sets up-
wards; anticlockwise it sets downwards.
Fig. 53
To rapidly check the correct direction of the beam,
place the scooter on a flat ground, 10 m away from a
wall.
Turn on the dipped headlight, seat down on the scooter
and verify that the headlight beam projected on the wall
is little under the horizontal line of the headlight (about
9/10 of the total length - see Fig. 54).
Fig. 54
75
Hide quick links:
Advertisement
Table of Contents
