76
Fig. 55
Fig. 56
CHANGING THE BULBS (Fig. 55)
It is necessary to remove the handlevar cover (see "Re-
moving the handlebar cover" - page 73) to extract the
relative lamp-socket; then remove the pressure
plugged-in bulb and change it with a new one.
CHANGING THE BULBS (Fig. 56)
Proceed as follows:
Take the screw off (1).
Remove the protection glass (2).
Press the bulb slightly and rotate it anticlockwise.
Remove the bulb (3) from its seat.
Correctly install a new bulb, following the reverse
order.
Tighten the screw (1) with a slight pres-sure,
otherwise the protection glass may break.