Table of Contents
Advertisement
To remove the starting relay, it is necessary to remove
the inspection lid (see "Removign the inspection lid" -
page 64); to extract the relay (1) from its support discon-
nect it from the related connector.
Change it and then carry out the operations in the oppo-
site order.
To remove the handlebar cover (1), loosen the four
fastening screws, then by means of a suitable screw
driver lift up the tongue seat inside the handlebar cover
(Fig. 51 A). Carry out this operation for both the upper
and the lower tongue seat, at the right and at the left
of the handlebar cover; remove it carefully avoiding
breaking the tongues.
We suggest to carry out this operation each
time you remove the handlebar cover to
avoid breaking the fastening tongues.
1
Fig. 51
Fig. 51A
73
Hide quick links:
Advertisement
Table of Contents
