APRILIA SCARABEO 50 - 1994 Use And Maintenance Manual page 65

Every time the oil in the tank runs out, clean
the mixer oil plant.
Operate as it follows:
‹
Fill up the oil tank (see "Mixer Oil Tank" - page 22).
‹
Remove the inspection lid (see "Removing the in-
spection lid" - page 64).
‹
Remove the engine air cooling conveyor (1 - Fig.
43).
‹
Loosen the cross screw (1 - Fig. 44) on the mixer
pump and wait for the oil to come out from the hole.
‹
When the oil flowing out doesn't show any air
bubble, then tighten the screw again (1 - Fig. 44).
It is important to wait until the air has com-
pletely come out as the engine running with
some air in the mixer oil plant could cause severe
damages to the engine itself.
‹
To reassemble it, carry out these operations in the
opposite order.
1
Fig. 43
Fig. 44
1
65