Table of Contents
Advertisement
‹
Carefully insert the fixing clamp of right fork leg in
its fitted seat in the brake shoe cover.
‹
Put the feather of the mileage recorder back in the
fitted slot on the wheel hub.
‹
After inserting and tightening the wheel pin (3-Fig.
32), repeatedly pump up the fork to align the stems,
then tighten the screw (2-Fig. 32).
‹
Screw up the brake transmission again (1-Fig. 31).
‹
Screw up the connection of the mileage recorder
cable (1-Fig. 32) and verify its correct functioning.
Repeatedly pull the brake lever to check the
correct functioning of the braking system.
Check the wheel centering.
In any case we suggest you to consult an
Authorized Dealer who will check the tightening, in
order to avoid all inconvenients which could cause
severe damages to you and to other people.
3
1
Fig. 32
2
55
Hide quick links:
Advertisement
Table of Contents
