Table of Contents
Advertisement
To remove dirt and mud from the painted surfaces use
a low pressure water jet; carefully wet the dirty parts,
remove mud and filth with a soft car sponge impreg-
nated with a lot of water and shampoo (2+4% parts of
shampoo and water).
Then rince with plenty of water and dry with a chamois
leather.
To clean the outer parts of the engine use a degreaser,
brushes and wipers.
Polish with silicone wax only after having carefully
washed the vehicle.
Do not wash the scooter under the sun, es-
pecially in summer, when the body is still
warm as if the shampoo becomes dry before the rins-
ing, it can damage the paint.
Do not use high pressure water nor air jets and
neither vapour jets on the following parts: wheel
hubs, controls on the right and on the left of the
handlebar, carburettor, brake pump, devices and in-
dicators, exhaust silencer, tool case, glove-compart-
ment, starting switch, steering lock.
Avoid damaging rubber and plastic parts with deter-
gents and corrosive or penetrating solvents.
After the scooter has been washed, its brak-
ing function could be temporarily impaired
because of some water on the grip surfaces.
We suggest to provide for long braking distances to
avoid accidents.
Brake repeatedly to restore normal conditions.
79
Hide quick links:
Advertisement
Table of Contents
