Prestige 100MH PSTN Router/Hub
7.2.2
Generic Filter Rule
This section will show you how to configure the protocol-independent parameters for a
Generic filter rule for your Prestige. (For information on the protocol-dependent fields, refer
to the previous section, TCP/IP Filter Rule.)
Figure 7-5 displays Menu 21.1.2 - Generic Filter Rule
Press Space Bar to Toggle.
Chapter 7 Filter Configuration
7-10
Menu 21.1.2 - Generic Filter Rule
Filter #: 1,1
Filter Type= Generic Filter Rule
Active= No
Offset= 0
Length= 0
Mask= N/A
Value= N/A
More= No
Action Matched= Check Next Rule
Action Not Matched= Check Next Rule
Press ENTER to Confirm or ESC to Cancel:
Figure 7-5.
Menu 21.1.2 - Generic Filter Rule
Log= None