17.1 Creating a Static Route
Enter 12 from the main menu to go to Menu 12 – Static Route Setup.
Choosing a static route to edit displays the following screen.
The following table describes the fields for Menu 12.1 - Edit IP Static Route Setup.
FIELD
Route #
This is the index number of the route as listed in Menu 12 — IP Static
Route Setup.
Route Name
Enter a descriptive name for this route. This is for identification purpose
only.
Active
This field allows you to activate/deactivate this static route.
Static Route Setup
Static routes tell the VES how to forward management traffic.
Menu 12 - IP Static Route Setup
1. ________
2. ________
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________
Enter selection number:
Figure 17-1 Menu 12 – Static Route Setup
Menu 12.1 - Edit IP Static Route
Route #: 1
Route Name= ?
Active= No
Destination IP Address= ?
IP Subnet Mask= ?
Gateway IP Address= ?
Metric= 2
Press ENTER to Confirm or ESC to Cancel:
Figure 17-2 Menu 12.1 - Edit IP Static Route
Table 17-1 Edit IP Static Route Menu Fields
DESCRIPTION
VES-1000 Series Ethernet Switch
Chapter 17
Static Route Setup
EXAMPLE
Yes
17-1