1. System Name - Choose a descriptive name for identification
2. Location - Enter the geographic location (up to 31 characters) of
3. Contact Person's Name - Enter the name (up to 8 characters) of
4. Protocols - Turn on or off the individual protocols for your
WAN Port Setup
Menu 2 is for entering information about your IDSL line.
purposes, e.g., p128l. This name should be no more than 8
alphanumeric characters. Spaces are not allowed, but "-" and "_"
are accepted. This name can be retrieved remotely via SNMP,
used for CHAP authentication, and will be displayed as the prompt
in the Command Mode. See Chapter 11 for more information on
CHAP; see Chapter 13 for more information on Command Mode.
your Prestige, e.g., San Jose.
the person in charge of your Prestige, e.g., Brent Harper. The
Location and the Contact Person fields are optional.
particular application. Unsupported protocols will have a N/A in
their fields.
Installation 23