======= Debug Command Listing =======
ATHE
ATGO
ATUR
ATLC
ATBAx
ATTD
ATSE
ATSH
10.9 Command Interpreter Mode
This option allows you to enter the command interpreter mode. A list of valid commands can be found by
typing [help] at the command prompt. For more detailed information, check the ZyXEL web site or send e-
mail to the ZyXEL Support Group.
Enter Menu Selection Number: 8
Copyright (c) 1994 - 2001 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
ip
ras>
10.10 Boot Module Commands
Prestige boot module commands with accompanying explanations are shown in the following table. For
ATBAx, x denotes the number preceding the colon to give the console port speed following the colon in the
list of numbers that follows; e.g. ATBA3 will give a console port speed of 9.6 Kbps. ATSE displays the
seed that is used to generate a password to turn on the debug flag in the firmware. The ATSH command
shows product-related information such as boot module version, vendor name, product model, RAS code
revision, etc.
System Maintenance
print help
boot system
upload RAS code
upload RAS configuration file
change baud rate. 1:38.4, 2:19.2, 3:9.6,
4:57.6, 5:115.2
download configuration to PC
display seed for password generation
display Revision, etc.
Figure 10-21 Boot Module Commands
exit
bridge
Figure 10-22 Command Mode
ether
wan
ipx
Prestige 643 ADSL Router
10-19