C
H A P T E R
The System Information screen displays general device information (such as
firmware version number) and hardware polling information (such as fan status).
You can check the firmware version number and monitor the hardware status in
this screen.
To open this screen, click Basic Setting > System Information.
Figure 41 System Info
The following table describes the labels in these screens.
Table 10 System Info
LABEL
System Name
ZyNOS F/W
Version
DSP Code Version This field displays the current Digital Signal Processor firmware
Hardware Version
Serial Number
Ethernet Address
VoIP DSP Version
Codec F/W
Version
IES-1248-51V User's Guide
System Information
DESCRIPTION
This field displays the device 's model name.
This field displays the version number of the device 's current
firmware including the date created.
version number. This is the modem code firmware.
This is the version of the physical device hardware.
This is the individual identification number assigned to the device at
the factory.
This field refers to the Ethernet MAC (Media Access Control) address
of the device.
This field displays the current Voice over IP Digital Signal Processor
firmware version number.
This field displays the current audio coder / decoder firmware version
number
10
109