Table of Contents
Advertisement
Setting the date and time
1 .
Move the cursor to the date and time fields at the
bottom of the screen.
2 .
Press the [ENTER] button.
The Time Stamp window appears.
3 .
Use the [E1]–[E5] knobs to specify the date and
time.
4 .
Select [E6] CLOSE.
5 .
Save the system settings, and then turn the power
off and on again.
Keyboard Settings
(KEYBOARD)
Parameter
Value
Specifies the velocity transmitted when a key is played.
REAL
Keyboard
Velocity
1–127
LIGHT
Keyboard
MEDIUM
Velocity Curve
HEAVY
Keyboard
Velocity Curve
-10–+9
Offset
Arpeggio
Specifies how arpeggios will be triggered.
OFF
Arpeggio
BEAT
Trigger
Quantize
MEAS
OFF/ON
Arpeggio
Switch Mode
OFF/ON & ARP
SCREEN
Explanation
The transmitted velocity value will
correspond to the force with which
you strike the key.
The transmitted velocity value will
be fixed, regardless of the force with
which you strike the key.
The keyboard will have a lighterfeeling
touch. Since you'll be able to reach
fortissimo (ff ) without having to play
as strongly as with the "MEDIUM"
setting, the keyboard will feel lighter.
This setting makes it easier for people
with reduced finger strength to play
the keyboard.
This is the standard keyboard touch
setting.
The key will have a heavier-feeling
touch. Since you'll need to play more
strongly than with the "MEDIUM"
setting in order to reach fortissimo
(ff ), the keyboard will feel heavier. This
setting allows you to use your playing
dynamics to add more expression to
your performances.
Adjusts the keyboard velocity curve.
Lower values make the keyboard feel
lighter.
Higher values make the keyboard feel
heavier.
The arpeggio starts the moment you
play the keyboard.
If you play the keyboard while the
sequencer or a rhythm pattern is
playing, the arpeggio automatically
starts at the beginning of the beat.
If you play the keyboard while the
sequencer or a rhythm pattern is
playing, the arpeggio automatically
starts at the beginning of the measure.
The ARPEGGIO screen does not appear
when you operate the [ARPEGGIO]
button to change from OFF to ON.
The ARPEGGIO screen appears when
you operate the [ARPEGGIO] button to
change from OFF to ON.
Settings for the Entire FANTOM
Parameter
Value
OFF/ON
Chord
Memory
Switch Mode
OFF/ON &
CHD SCREEN
Pedal Settings
(PEDAL)
Parameter
Value
Pedal Assign
SYS, SCENE
Source
Control Pedal
Pedal1, 2
STANDARD,
Polarity
REVERSE
Specify the functions that are controlled by pedals
connected to the PEDAL CTRL 1, 2 jacks.
OFF
CC01–31,
33–95
BEND DOWN
BEND UP
AFT
START/STOP
TAP TEMPO
SCENE DOWN
Pedal1, 2
Assign
SCENE UP
OCT DOWN
OCT UP
ARPEGGIO SW
CHORD MEM
SW
DEC
INC
Pedal1, 2
0–127
Range Min
Pedal1, 2
0–127
Range Max
Explanation
The CHORD MEMORY screen does not
appear when you operate the [CHORD
MEMORY] button to change from OFF
to ON.
The CHORD MEMORY screen appears
when you operate the [CHORD
MEMORY] button to change from OFF
to ON.
Explanation
Specifies whether the functions
controlled by pedals connected to the
PEDAL CTRL 1, 2 jack are determined
by the system settings (SYS) or by the
settings of the scene (SCENE).
Selects the polarity of the pedal
connected to the PEDAL CTRL 1, 2
jacks.
Depending on the model of pedal, the
result of depressing or releasing the
pedal might be the opposite of what
you expect. If so, choose the "REVERSE"
setting. If you're using a Roland pedal
(that has no polarity switch), choose
the "STANDARD" setting.
No function is assigned.
Controller number 1–31, 33–95
The same effect as moving the pitch
bend lever to the left.
The same effect as moving the pitch
bend lever to the right.
Aftertouch
Start/stop the sequencer.
The same effect as pressing the panel
[TAP] button.
Switch the scene to the previous
number. When using a scene chain,
switch to the previous number in the
chain set.
Switch the scene to the next number.
When using a scene chain, switch to
the next number in the chain set.
The same effect as pressing the panel
OCTAVE [DOWN] button.
The same effect as pressing the panel
OCTAVE [UP] button.
The same effect as pressing the panel
[ARPEGGIO] button.
The same effect as pressing the panel
[CHORD MEMORY] button.
The same effect as pressing the panel
[DEC] button.
The same effect as pressing the panel
[INC] button.
Specify the lower limit value for the
range of the assigned function.
Specify the upper limit value for the
range of the assigned function.
165
165
Advertisement
Table of Contents
