How to Edit Sound Parameters
To switch between the two pad banks, and edit each bank separately. It is not possible to
simultaneously edit the sound parameters of pad banks A and B. Use [BANK A/B]
Editing a sound parameter
1
2
Selecting and changing parameters is called editing.
MEMO
3
4
You can have only one of the Pad Bank Instruments sound by setting Layer to OFF.
MEMO
5
6
7
8
MEMO
Pressing PATCH/VALUE [+] while holding down PATCH/VALUE [-] (or vice versa) makes this change more
rapidly. However, when selecting a Parameter Group Instrument (INST), when youpress PATCH/VALUE [+]
while holding down PATCH/VALUE [-] (or vice versa), you jump to the next Instrument group.
In the Play mode, use the PATCH/VALUE [-] or [+] buttons to select the
Patch (1–99) to edit.
Press [EDIT] to enter the Edit mode.
Strike the pad you wish to edit.
Turn Layer on or off if necessary.
Press [BANK A/B] to select the bank you wish to edit.
The selected PAD BANK indicator will be flashing.
Press [SOUND] or [SELECT] to select the SOUND parameter group.
Press [
] or [
] to select the parameter to be edited.
Use PATCH/VALUE [-] or [+] to set the value.
For a numerical parameter, pressing PATCH/VALUE [-] will decrease the value, and
pressing PATCH/VALUE [+] will increase the value.
2
27