Other Information For This Machine; Laws And Regulations; Legal Requirements - Ricoh Pro C7500 Safety Information Manual

3. Other Information for This Machine

Laws and Regulations

Duplication and Printing Prohibited
Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports,
driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no
responsibility for its completeness or accuracy. If you have any questions concerning the
legality of copying or printing certain items, consult with your legal advisor.

Legal Requirements

Laser Safety
For Pro C7500/C7500H
This machine complies with the requirements of IEC 60825-1:2014 (EN 60825-1:2014) for
class 1 laser product. The machine contains four (five*) VCSELs (Vertical Cavity Surface
Emitting Laser), 772–792 nanometer wavelength for each emitter. The beam divergence
angle is 5.5 degrees (minimum) and 7.9 degrees (maximum) in the vertical direction, and
5.5 degrees (minimum) and 7.9 degrees (maximum) in the horizontal direction, and laser
beams are generated in Continuous Wave (CW) mode. Each VCSEL has forty light sources
and the maximum output power of each light source is 1.23 milliwatt.
The following label is attached on the rear side of the machine:
* When the 5th station upgrade kit is attached.
Caution
Use of controls or adjustments or performance of procedures other than those specified in
this manual might result in hazardous radiation exposure.
For Media Identification Unit Type S3
Media Identification Unit (optional) complies with the requirements of IEC 60825-1:2014
(EN 60825-1:2014) for class 1 laser product. Media Identification Unit contains one
VCSEL (Vertical Cavity Surface Emitting Laser), 772–792 nanometer wavelength. The
beam divergence angle is 5.3 degrees (minimum) and 7.9 degrees (maximum) in the
vertical direction, and 5.3 degrees (minimum) and 7.9 degrees (maximum) in the horizontal
direction, and laser beams are generated in Continuous Wave (CW) mode. The VCSEL has
twelve light sources and the maximum total output power is 2.5 milliwatt.
The following label is attached on the bottom of the machine.
Caution
Use of controls or adjustments or performance of procedures other than those specified in
this manual might result in hazardous radiation exposure.
Note to Users EEA Countries
Model Name: Pro C7500/C7500H
Manufacturer:
Ricoh Co., Ltd.
3-6 Nakamagome 1-chome, Ohta-ku, Tokyo. 143-8555, Japan
Importer (CE marking, ProdSG):
Ricoh Europe SCM B.V.
Blankenweg 24, 4612 RC Bergen op Zoom, The Netherlands
Importer (UKCA marking):
Ricoh UK Limited
800 Pavilion Drive, Ricoh House, Northampton, NN4 7YL
19