LELY Vector Operator's Manual page 8

Registration Vector
A type and serial number plate is attached to the following parts of the Vector:
• Power distribution box: outside the power distribution box, above the switch.
Mixing and Feeding Robot: on the centre of the rear frame above the battery tray.
•
Feed Grabber: on the frame above the control box
•
Bridge Crane: on the wheel frame.
•
Fixed Rail: on the frame above the bend.
•
Additives dispenser (frequency pulse): inside the control box.
•
Control box external concentrates (frequency weight): inside the control box.
•
Control box automatic door: inside the control box.
•
Always include the type and serial numbers of the part of the Vector when you contact your local Lely
service provider or order spare parts.
Figure 1. Example type and serial number plate
A decal with the serial number and bar code is attached inside every control box.
Type plate on the power distribution box is a decal and looks a bit different:
The serial number starts with the revision letter (or "-" in case of the first version), year, week nr and
•
following number. These number are made by the manufacturer. Lely has a different serial numbering.
X.XXXX.XXXX.X
Z.ZZZZ.ZZZZ.Z
xxxVxC xxHz
Figure 2. Decal on the PDB
License Agreements Open Source Software
GPL2.0 license agreements
The following executables used in this product are subject to the GPL2.0 licence agreements:
Linux kernel 2.6
•
Lighttpd
•
8
YYYYYYYYYYYYYYY
X
X
x.x kW
xxx kA
ART. WK NR.
YEAR
ART. NR
REV. (YY)
NR.
(WW) (XXX)
in n o vato rs in ag ric u ltu re
Preface