Connect The Mixing And Feeding Robot Manually To The Charger; Lower The Skirt To Clear The Route Of Snow - LELY Vector Operator's Manual

6. Activate:
[L] to turn right
•
[R] to turn left
•
[L] and [R] to go straight on
•
7. Push to change the direction, if necessary.
8. Use the buttons
displayed.
9. Push to start, hold it.
10. Release to stop.
5.8.2

Connect the Mixing and Feeding Robot Manually to the Charger

To connect the Mixing and Feeding Robot manually to the charger use the page Work and see the
explanation of the third tab MANUAL CHARGER (see Put the Mixing and Feeding Robot In Operation on
page 5-2).
5.8.3

Lower the Skirt to Clear the Route of Snow

Do not use de-icing salt on the route, only use it when there is no other option. This may
cause corrosion and damage the Mixing and Feeding Robot. It is best to use sand.
During periods of frost and snow fall the routes of the Mixing and Feeding Robot outside the barn must
be de-iced and cleared of snow. During this period it is recommended to let the Feeding Robot drive
outside the barn with a lowered skirt. With heavy snowfall use for example a shovel to clear the route.
To lower the skirt on the routes outside the barn do the following:
1. Start the WebUI (see page 5-16).
2. Push the button
3. Go to the pageRoutes.
4. Select a route (>).
Operating Instructions
and to adjust the speed, a percentage of the maximum driving speed is
Settings.
in n o vato rs in ag ric u ltu re
5-35