Rotate Copy; Manual Paper Select - Muratec MFX-2500 Operating Instructions Manual

Automatic document size detection for auto paper selection
Your machine can automatically detect the following size of your document and
select a suitable sized paper to copy your document.
• 11 17
• 8.5 14
• 8.5 11
• 5.5 8.5
If the suitable sized paper is not set in the paper cassette, the
If you want to copy with the paper the machine auto-
matically selected, press
If you want to copy with other size paper, press
to cancel this operation, then set the suitable paper in
the cassette or adjust the Reduce/Enlarge ratio.
If you set the non-standard sized document or the machine could not detect the doc-
ument size, the shows:
LCD
If you want to copy with the paper that the machine
automatically selected, press
If you want to copy with other sized paper, press
to cancel this operation, then set the suitable paper in
the cassette or adjust the Reduce/Enlarge ratio.

Manual paper select

You can select the paper manually by pressing [Paper] or using the cursor key.
Note: If the optional multi-paper tray is attached, you can select the multi paper
tray, see "Using the bypass tray"
shows:
LCD
.
START
STOP
.
START
STOP
Page 1.10.

Rotate copy

When the document is set at a different direction from the recording paper in the
paper cassette with auto paper select mode on, the machine automatically rotate
the scanned image by 90° to match the recording paper direction. However, this
applies to the 8.5 11 size paper only.
Note: Rotate copy is not available with the following functions:
• Combine copy
• Repeat copy
• Directional Magnification copy
• Copying from multi-paper tray
• Copying with non standard sized paper
Getting started
1.7