Print The Copy Setting - Muratec MFX-2500 Operating Instructions Manual

03. Auto reset mode
Note: Default: Three minutes
The machine returns to its initial condition automatically after a certain period of
time. You can change this time from 1 to 10 minutes.
Note: The machine first resets the
resets the key settings to the initial condition.
1
Press , [Copy Set].
MENU
2
Select "E. User Settings" and then press [Enter].
3
Select "03. Copy Panel Reset" and then press [Enter].
4
Enter the time to auto resetting, and then
press [Enter] to save the setting.
5
Press to return to standby.
RESET
04. Scanning resolution for copy
Note: Default: 600 dpi
You can set either 400 dpi or 600 dpi for the scanning resolution in copy mode.
1
Press , [Copy Set].
MENU
2
Select "E. User Settings" and then press [Enter].
3
Select "04. Copy Scan Resolution" and then press [Enter].
4
Select desired resolution for default setting
using the cursor key.
5
Press [Enter] to save the setting.
6
Press to return to standby.
RESET
display, and after certain period of time it
LCD
F. Print the copy setting
You can print the list of copy settings. In the list, the current setting is shaded.
To print the copy setting list:
1
Press , [Copy Set].
MENU
2
Select "F. Print Copy Settings" using the cursor key.
3
Press [Enter].
Default copy settings
3.5