Muratec MFX-2500 Operating Instructions Manual page 79

To make copy with repeat:
1
Press .
MENU
2
Select "Repeat" using the cursor key, and
then press [Enter].
Note: The Auto Reduce/Enlarge is selected
automatically.
3
Select the desired repeat modes using the
cursor key.
Note: The number of documents repeated can be 2, 4 or 8.
4
If you want to change the recording paper size for combining, proceed to next
step. Otherwise, skip to step 6.
5
Press [Paper] to select the paper size, and then press [Enter].
6
You can insert the separator lines between repeated images. If you want to
insert the separator lines, proceed to next step. Otherwise, skip to step 8.
7
Press and then press [Line] to print the
NEXT
separator lines. To cancel the separator lines,
press [Line] again.
Note: The width of the line can be changed.
See page 3.4.
8
If you want to change the layout, proceed to
next step. Otherwise, skip to step 12.
Note: Use this function, when you set the reduction/enlargement ratio by
yourself.
9
Press [Layout], the will show:
LCD
Note: If [Layout] is not appeared on the
, press until it appears.
LCD NEXT
10
Select the layout using the cursor key.
11
Press [Enter] to save the layout setting.
12
Press [Enter] to save the setting.
Note: If [Enter] is not appeared on the
Note: To cancel the setting of the combine function, press
, press .
LCD NEXT
.
CLEAR
13
The Repeat icon will be displayed on the
14
Set the documents.
Note: Set the documents with same direc-
tion as you see on the
If you set your documents in the ADF:
Press . After the all documents in the ADF are scanned, the copies will
START
be printed.
If you set your document on FBS glass:
Press after setting the first page of your documents on the FBS glass.
START
Then set the next page of your document, then press [Start].
After all your documents are scanned, press [Exit].
Advanced features
.
LCD
in step 5.
LCD
2.3