Muratec MFX-2500 Operating Instructions Manual page 191

Just in case ...
What you see on the
LCD
Document stored
Enter number (0-32)
Hang up phone
In printing
In relay box
In secure box
Invalid I.D. code
Invalid number
Invalid protect passcode
4.2
What it means/What to do
You tried to erase a batch box which contains at
least one document. Erase the document(s), then
try again.
. . . or . . .
You tried to store the polling document in your
fax machine, where one already had been
stored. Wait for the fax to complete the regular
polling operation, then try again.
You tried to enter a call group number greater
than 32. Your machine can maintain 32 call
groups, numbered 1-32 (call group 0 covers all
the groups). Determine the correct call group
identifier number and enter it, instead.
The optional handset is off-hook.
Hang it up, making sure the upper part of the
handset presses down on the "hook" button.
The command you're trying to enter requires the
use of the printer, which is already in use. Wait
for the fax to finish printing, then try again.
You tried to store a document for polling in an
F-Code box which is set to be a relay box.
Select an F-Code box which is set to be a bulletin
box, then try again.
You tried to store a document for polling in an
F-Code box which is set to be a security box.
Select an F-Code box which is set to be a bulletin
box, then try again.
The F-Code box . . code you entered isn't valid.
I D
Try re-entering your F-Code box . . code.
I D
You entered the incorrect number which has no
function during the current operation.
The protection passcode you entered isn't valid.
Repeat the operation, entering the correct protec-
tion passcode.
What you see on the
LCD
Memory overflow
Keep these pages?
Mirror carriage error
No command stored
No document stored
No protect passcode
No report
Not stored
PIN is not stored
What it means/What to do
During scanning of the document, the memory
overflowed. Press [YES] to tell your fax to keep
as many pages in memory as possible, or press
[NO] to delete from memory all pages stored
during this operation (but not previous opera-
tions).
The mirror carriage of your machine has become
inoperable. Call your authorized Muratec dealer
or Muratec Customer Support.
You pressed to review
REVIEW COMMANDS
upcoming commands, but your fax machine had
none stored.
You tried to print a document from memory, but
your fax machine had none stored.
You tried to protect an operation or department
code but there's no protection passcode stored in
your fax machine. Store a protection passcode in
your machine, then retry protecting the operation
or department code.
You requested an activity journal or confirma-
tion report, but your fax machine has no record
of any fax jobs having occurred.
You selected an autodialer, batch box or F-Code
box number for which there is no phone number
programmed. Either choose another number or
dial a phone number directly from the numeric
keypad.
. . . or . . .
You tried to turn on the department code setting
but there are no department codes stored in
your fax machine. Store at least one department
code, then try again.
You selected "Mode1" in the mask feature
PIN
and tried to call an autodialer number in which
no PIN has been entered, or to call using
numeric keypad without . Enter a
PIN
try again.
, then
PIN