Directional Magnification; Directional Ratio(%) Magnification; Directional Size (Inch) Magnification - Muratec MFX-2500 Operating Instructions Manual
General reference
Hide thumbs
Also See for MFX-2500:
- Field engineering manual (453 pages) ,
- Operating instructions manual (103 pages) ,
- User manual (102 pages)
Table of Contents
Advertisement
Advanced features
Directional magnification
Directional ratio(%) magnification
You can copy with different magnification ratios horizontally and vertically.
Note: You can enter the ratios from 25% through 400 % in 1% step.
With some ratios you entered, a part of the image might not be copied or
blank margins will appear on copies.
1
Press
.
MENU
2
Select "D. Mag." using the cursor key and then press [Enter].
3
Enter the desired vertical ratio using
of the cursor key or numeric keypad. Then,
press
or
of the cursor key.
4
Enter the desired horizontal ratio using
of the cursor key or numeric keypad.
Note: To change number you entered, press
or
of the cursor key, then enter
new number.
5
Press [Enter] to save the setting.
6
The D.Mag. icon will be displayed on the
7
Set your documents, then press
2.6
Vertical %
Horizontal %
or
or
.
LCD
.
START
Directional size (inch) magnification
The suitable magnification ratios will be automatically selected according to the
horizontal and vertical length of your document and copy image you entered.
Vertical
original size
Horizontal original size
Note: The range of size you can enter is 0.1 – 50.0 inches in 0.1 inch steps.
Note: If the calculated ratio is over than 400% or under than 25%, the ratio is set
with 100% automatically.
1
Press
.
MENU
2
Select "D.Mag." using the cursor key and then press [Enter].
3
Press [Mag.inch].
4
Enter the horizontal size of your document
using the
or
of the cursor key or
numeric keypad. Then press
key.
5
Enter the vertical size of your document
using the
or
of the cursor key or
numeric keypad. Then press
key.
6
Enter the horizontal size of the copy using the
numeric keypad. Then press
7
Enter the vertical size of the copy using the
numeric keypad.
Note: To change number you entered, press
enter new number.
8
Press [Enter] to save the setting. The D.Mag. icon will be displayed on the
.
LCD
9
Set your documents, then press
Vertical
copy size
Horizontal copy size
of the cursor
of the cursor
or
of the cursor key or
of the cursor key.
or
of the cursor key or
or
of the cursor key, then
.
START
Advertisement
Chapters
Table of Contents
Troubleshooting
