Muratec MFX-2500 Operating Instructions Manual page 99

Symptom Possible cause/What to do
The edge of the copy is The FBS pad is dirty.
dirty. Wipe the FBS pad clean with a soft cloth dampened with
alcohol.
. . . or . . .
You have selected a paper size larger than your original
document. (When zoom ratio is set as full size 100%)
Select the same copy paper size as the original.
. . . or . . .
The original document is not placed in the correct posi-
tion. (When zoom ratio is set as full size 100%)
Select the same copy paper size as the original. Or, reload
the paper in the same direction as the original.
. . . or . . .
The reduction ratio selected is not in accord with the copy
paper size. (When doing the manual reduction copying.)
Select the enlarge ratio according to the copy paper size.
The image on the copy The original document is not placed in the correct
is not aligned properly. position.
Place the original correctly on the FBS glass against the
original width scale. Or, load it into the ADF correctly
along the document guide.
. . . or . . .
The original documents may not be suitable for use in the
ADF.
Raise the platen cover and place the originals on the FBS
glass one at a time, instead of using the ADF.
. . . or . . .
Something is sticking to the original document.
Wipe the FBS glass clean with a soft dry cloth.
Trouble shooting
4.3