Accessing The Default Copy Setting Mode; Erase Border Setting - Muratec MFX-2500 Operating Instructions Manual

Accessing the default copy
setting mode
You can change or set the machine's default copy settings.
Note: Regarding the changing of the fax settings, see "Fax Reference".
Note: Regarding the changing of the machine settings, see "General Reference".
To access the copy settings:
1
Press .
MENU
2
Press [Copy Set].
3
Select the desired settings using the cursor key, and then press [Enter].
4
Change the settings as you want.
5
Then, press [Exit] to save the setting.
A. Erase border setting
Note: Default: OFF, Erased margin; Left and Right 0.2 , Top and Bottom 0.2 .
The default setting of the erased margins in the erase border function can be
changed within 0.2 – 2.0 inches in 0.1 inch steps.
1
Press , [Copy Set].
MENU
2
Select "A.Erase Border Setting" and then
press [Enter].
3
To change the default setting of Erase Border,
select "Erase Border" then press [Enter].
4
Select "ON" or "OFF" then press [Enter] to
save the setting.
5
If you want to change the default value of
erased margin, select "Default" then press
[Enter].
6
Enter desired value, then press [Enter].
7
Press [Exit] or to save the default set-
RESET
ting.
Note: Press to return to standby.
RESET
Note: If you set the default setting to ON, the Erase Border icon will be appeared
on the .
LCD
Default copy settings
3.1