Basic Procedure; Select Document Type; Adjust Image Contrast; Select Paper - Muratec MFX-2500 Operating Instructions Manual

Getting started

Basic procedure

1
Make sure the machine is in the Copy mode. To change to the Copy mode,
press .
COPY
2
Press to clear the previous setting, if necessary.
RESET
3
Set your document.
See "How to set the document," page 1.4.
4
Set any settings you want.
5
If you want to make only one copy of each page of the document, skip to step
7. Otherwise, proceed to step 6.
6
Use the numeric keypad to enter the desired number of copies for each page
in your document. You can set up to 99 copies.
Note: To change the number entered, overwrite it with new number. If you
want to enter fewer than 10, enter the reading zero. (For example, 05.)
7
Press to begin the copying process.
START
Note: To stop the machine during multi-copying, press
Note: To return the machine to the initial condition after copying, press
Note: By default, your machine make a copy with the following conditions:
Document type: Auto
Image contrast: Auto
Paper selection: Auto
Reduce/Enlarge ratio: 100%
Note: If you do not operate the machine for a certain period after copying, the
machine returns to the initial display and after a certain period, it resets
the any setting to the default. This is called "Auto Reset". You can change
the auto reset time. See Page 3.5.
1.6
.
STOP
.
RESET

Select document type

You can select the two document types by pressing
– Select this mode when copying the documents con-
PHOTO
taining the photographs or drawings with letters.
/ – Select this mode when copying the photographs or
PHOTO TEXT
drawings.
– This mode automatically set the suitable setting
AUTO
according to the document type.
Note: You can change the document type priority.

Adjust image contrast

You can adjust the copy image contrast to match your document by pressing
.
CONTRAST
– Darkens weak, "washed-out" images.
DARK
= – Provides some darkening of documents.
– Suited to most documents.
NORMAL
= – Provides some lightening of documents.
– Lightens up overly dark documents.
LIGHT
– This mode automatically sets the suitable setting
AUTO
according to the document density.
Note: You can change the image contrast priority.

Select paper

Auto paper select
The machine selects suitable sized paper automati-
cally based on the document size and the
reduce/enlarge ratio.
Note: Make sure that the "Auto" is selected. If not,
select "Auto" by pressing [Paper] or using
cursor key.
.
DOCUMENT
See Page 3.4.
See Page 3.4.