Getting started
Reduce / Enlarge
Auto Reduce/Enlarge
Your fax machine can select an appropriate reduction/enlargement ratio based on
the paper and document sizes you select.
Note: Be sure to set the document in the same direction as the selected paper.
Note: If your fax machine could not detect the document size, it will make a copy
with 100% ratio.
To copy with auto Reduce/Enlarge:
1
Set your document on ADF or FBS glass.
2
Select "Auto" by pressing
The all of reduce/enlarge
3
Select paper size by pressing [Paper] or cursor key.
4
Press
.
START
Reduce/Enlarge with a preset rate
You can copy with a preset ratio of reduction/enlargement. If you set a preset ratio,
your machine will select an appropriate paper automatically.
Note: According to the ratio you selected, a part of the image might be lacked.
To copy with a preset rate of reduction/enlargement:
1
Set your document on ADF or FBS glass.
2
Select "Auto" by pressing [Paper].
Note: If you want to select the paper size,
press [Paper] to select the paper size
you want use.
3
Select a ratio by pressing
4
Press
.
START
1.8
/
.
REDUCE
ENLARGE
lights.
LED
/
.
REDUCE
ENLARGE
Zoom Copy
You can enter the reduction/enlargement ratio from 25% through 400% in 1% steps.
Note: You can select a preset ratio, and then adjust the ratio with the cursor key.
Or, directly enter the ratio by numeric keypad.
To copy with reduction/enlargement in 1% steps:
1
Set the document on ADF or FBS glass.
2
Press [Zoom].
3
Enter the ratio you want using the
of the cursor key or the numeric keypad.
4
Press
.
START
and