Scanning The Document - Muratec MFX-2500 Operating Instructions Manual

Scanning the document

When scanning the document(s) using the ADF
1
Set your document in the ADF (automatic document feeder).
See "How to set the document," page 1.4.
2
Set any setting you want.
3
Press .
START
Normally, the will show (see right) and
LCD
start copying after scanning the document.
However....
When you set the sort, combine, duplex or
booklet function, the shows as shown
LCD
right.
In this case, you can set different document(s)
for copying after finish the currently scan-
ning.
If you want to scan a different document:
(1) Press [Yes] during the machine is scan-
ning the current document.
(2) After scanning the first document(s), set
next document in the ADF or FBS and
then press [Start]. The machine will start
scanning the next document(s).
If you want to scan more document(s), repeat step (1)–(2).
Note: You can set the next document on the FBS glass to scan it (see right
column).
(3) After scanning all pages of your document, press [End].
The machine start printing the scanned documents.
When scanning the document using the FBS (Flatbed scanner)
Note: The machine gives priority to the document on the ADF to make a copy or
send a fax, when the documents are set both on the ADF and FBS glass.
1
Set your document on the FBS glass.
See "How to set the document," on page 1.4.
2
Set any setting you want.
3
Press .
START
Normally, the will show (see right) and
LCD
start copying after scanning the document.
However....
When you set the sort, combine or duplex
function, the appears as shown right.
LCD
In this case, you can set different documents
for copying after finishing the current scan-
ning.
(1) After scanning the first page of your docu-
ment, remove the first page and then set
the next page of your document on the
FBS glass or ADF.
Note: You can use the ADF to scan the next
document (see left column).
(2) Press [Start]. The machine will start
scanning the next page of your document.
If you want to scan more documents, repeat step (1)–(2).
(3) After scanning all pages of your document, press [End].
The machine will start printing the scanned documents.
Getting started
1.5