Laser Pointer Period - Datalogic PowerScan PD7100 Corded Product Reference Manual

Laser Pointer Period

Laser Pointer Period
This option specifies the period of the laser pointer blink during scanning. The laser
pointer will be activated for the time specified by Laser Pointer Control. then start blinking
OFF then ON at 50% duty cycle for the duration set by Laser Pointer Period.
ENTER/EXIT PROGRAMMING MODE
Laser Pointer Period = Disable
DEFAULT
Laser Pointer Period = 500 ms
Laser Pointer Period = 1 Second (1,000 ms)
Laser Pointer Period = 1.5 Seconds (1,500 ms)
Laser Pointer Period = 2 Seconds (2,000 ms)
43
Product Reference Guide