Label Id; Label Id: Pre-Loaded Sets - Datalogic PowerScan PD7100 Corded Product Reference Manual

Label ID

A Label ID is a customizable code of up to three ASCII characters (each can be one of
hex 0x01-0xFF), used to identify a barcode (symbology) type. It can be appended previ-
ous to or following the transmitted barcode data depending upon how this option is en-
abled. This feature provides options for configuring custom Label IDs as a pre-loaded set
(see
Label ID: Pre-loaded Sets on page 101
ID: Set Individually Per Symbology on page 103
always include an industry standard label identifier for ALL symbology types, see the pre-
vious feature

Label ID: Pre-loaded Sets

The reader supports two pre-loaded sets of Label IDs.
alternate set.
DEFAULT
Label ID Pre-loaded Set = Alternate Set
Table 17. Label ID Pre-loaded Sets
Symbology
CODABAR
CODE11
Product Reference Guide
Global AIM ID on page 98
When changing from one Label ID set to another, all other reader configura-
tion settings, including the host interface type, will be erased and set to the
standard factory defaults. Any customized configuration will be lost.
CAUTION
ENTER/EXIT PROGRAMMING MODE
character
) or individually per symbology (see
). If you wish to program the reader to
.
Label ID Pre-loaded Set = Return to Default Set
Default Label ID set
ASCII Hexidecimal
value
% 250000
CE 434500
shows the default set and
Table 17
Alternate Label ID set
ASCII Hexidecimal
character value
R 520000
b 620000
Label ID
Label
101