Error Codes - Datalogic PowerScan PD7100 Corded Product Reference Manual

Error Codes

Upon startup, if the reader sounds a long tone, this means the reader has not passed its
automatic Selftest and has entered FRU
sequence will be repeated. The following table describes the LED flashes/beep codes
associated with an error found.
1. Field Replaceable Unit (FRU)
Product Reference Guide
NUMBER OF LED
FLASHES/BEEPS
1 Configuration
2 Interface PCB
4 Reader Module
5 Laser Pointer (if so equipped)
6 Digital PCB
14 CPLD/Code Mismatch
1
isolation mode. If the reader is reset, the
ERROR
Contact Helpdesk for assistance
Error Codes
CORRECTIVE ACTION
289