Case Conversion; Character Conversion - Datalogic PowerScan PD7100 Corded Product Reference Manual

Data Editing

Case Conversion

This feature allows conversion of the case of all alphabetic characters to upper or lower
case.
DEFAULT
Case Conversion = Convert to upper case

Character Conversion

Character conversion is an eight byte configuration item. The eight bytes are 4 character
pairs represented in hexadecimal ASCII values. The first character in the pair is the char-
acter that will be converted. The second character in the pair is the character to convert
to. If the character to convert in a pair is FF, then no conversion is done.
For example, if you have the character conversion configuration item set to the following:
41423132FFFFFFFF
The first pair is 4142 or AB (41 hex is an ASCII capital A, 42 hex is an ASCII capital B)
and the second pair is 3132 or 12 (31 hex is an ASCII 1, 32 is an ASCII 2). The other
two pairs are FFFF and FFFF.
With the label, AB12BA21, it would look as follows after the character
112
Case conversion affects ONLY scanned barcode data, and does not
affect Label ID, Prefix, Suffix, or other appended data.
NOTE
ENTER/EXIT PROGRAMMING MODE
Case Conversion = Disable (no case conversion)
Case Conversion = Convert to lower case
®
PowerScan PD7100 Corded